5. Press to select SYSTEM SETUP.

6. Press

to highlight CLEARABLE WARNINGS.

7.Press to select CLEARABLE WARNINGS.

8. Press

or

to select the appropriate setting.

9.Press to set the selection.

10.Press PAUSE/RESUME.

Auto continue

You can determine printer behavior when the system generates an Auto Continuable error. ON is the default setting.

zON displays an error message for ten seconds before automatically continuing to print.

zOFF pauses printing any time the printer displays an error message and until you press .

To set the auto continue

1.

Press to enter the MENUS.

2.

Press

to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.

Press

to highlight SYSTEM SETUP.

5.

Press to select SYSTEM SETUP.

6.

Press

to highlight AUTO CONTINUE.

7.

Press to select AUTO CONTINUE.

8.

Press

or

to select the appropriate setting.

9.Press to set the selection.

10.Press PAUSE/RESUME.

Supplies low

The printer allows two options for reporting that supplies are low; CONTINUE is the default value.

zCONTINUE allows the printer to continue printing while displaying a warning until the supply is replaced.

zSTOP causes the printer to pause printing until you replace the used supply or press , which allows the printer to print while continuing to display the warning.

ENWW

37

Page 51
Image 51
HP 4600hdn 4600n manual Auto continue, Supplies low, To set the auto continue