14

15

16

17

18

4Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling.

5Grasp both sides of the cartridge and distribute the toner by gently rocking the cartridge from side to side.

6Remove the orange shipping lock from the new print cartridge. Discard the lock.

7Remove the inside sealing tape by breaking the orange tab on the end of the new print cartridge and pulling the tape completely out. Discard the tape.

8Align the print cartridge with the tracks inside the printer and insert the cartridge until it is completely seated.

Note If a cartridge is in the wrong slot, the control panel will display the message INCORRECT COLOR.

9Close the front cover and then close the top cover. After a short while, the control panel should display

READY.

10Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived. See the enclosed recycling guide for recycling instructions.

11If you are using a non-HP print cartridge, check the control panel for further instructions.

For additional help, go to http://www.hp.com/support/lj4600.

ENWW

125