HP Scanjet manual 152

Message	Description	Action
FLASH FILE OPERATION	The printer received a PJL file system	1. Printing may continue.
FAILED	command that attempted to perform	2. Turn the printer off and
	an illogical operation (for example, to	then back on.
alternates with	download a file to a non-existent	3. If the message
	directory).
		reappears, there may
Ready For menus press
		be a problem with the
✔
		software application.
FLASH FILE SYSTEM IS	The printer received a PJL file system	1. Use HP Web Jetadmin
FULL	command that attempted to store	software to delete files
	something on the file system but was	from the Flash Memory
alternates with	unsuccessful because the file system	and try again.
	is full.	2. To remove this
Ready For menus press		message from the
✔		display, turn the printer
		off and then back on.
FLASH IS WRITE	The file system device is protected	1. To enable writing to the
PROTECTED	and no new files can be written to it.	Flash Memory, turn off
		write protection, using
alternates with		HP Web Jetadmin.
		2. To remove this
Ready For menus press		message from the
✔		display, turn the printer
		off and then back on.
Genuine HP cartridge	A new HP cartridge has been	No action necessary.
installed	installed. The printer returns to the
	READY state after approximately
	10 seconds.
Genuine HP supplies	A new HP cartridge has been	No action necessary.
installed	installed. The printer returns to the
	READY state after approximately
	10 seconds.
INCORRECT <COLOR>	An incorrect cartridge is installed in a	1. Press ✔ and then press
CARTRIDGE	slot and the cover is closed.	for help.
alternates with		2. Press and to step
		through the
		instructions.
For status press ✔
Incorrect PIN	The wrong PIN was entered.	Re-enter PIN correctly.
		After three incorrect PIN
		entries, the printer will
		return to READY.

138 ENWW