HP Designjet 510 load originals and, paper, load originals, the glass, load originals on

load originals and	3
paper

load originals

You can copy many types of originals onto different paper types, weights, and sizes, including transparency film. It is important, however, that you choose the right paper and make sure that it is loaded correctly and not damaged.

There are two ways to load originals to your HP Digital Copier:

•Position the originals on the glass

•Feed originals into the ADF, if one is attached

load originals on You can copy almost any type of original by placing it directly on the glass. the glass

Many of the Special Features options, such as Which Size? or Poster, will not work correctly if the glass and lid backing are not clean. For more information, see clean the glass and clean the lid backing on page 35.

1Lift the lid and place the original face down on the glass, positioning it in the bottom-right corner with its sides touching the right and bottom edges.

It is important to place the original the bottom-right corner.

Tip! If your original is printed on transparency film, place a blank piece of paper on top of the transparency for better quality.

2Close the lid.

load paper and originals 7