hp digital copier series

set the power save mode time

The bulb in your HP Digital Copier remains on for a specified period so that the unit is immediately ready to respond to your request. When the

HP Digital Copier has not been used within that specified period, it turns the bulb off to preserve power and displays Power Save On in the front- panel display.

Tip! You can exit this mode by pressing any button on the front panel.

Your unit is automatically set to enter power-save mode after 12 hours. Follow these steps if you want the HP Digital Copier to enter this mode earlier.

1Press Menu.

2Press 3, then press 6.

This selects the Status and Maintenance menu, then selects the Set Power Save Mode Time option.

3Press until the desired time appears, then press Enter.

set the ring and beep volume

The volume of the button beeps on your HP Digital Copier is preset, but you can easily change the volume.

1Press Menu.

2Press 3, then press 8.

This selects the Status and Maintenance menu, then selects the Ring and Beep Volume option.

3Press to select Soft, Loud, or Off, then press Enter.

50

maintain your hp digital copier

Page 56
Image 56
HP 510 manual Set the power save mode time, Set the ring and beep volume