hp digital copier series

papers to avoid

We do not recommend the following papers:Any size paper other than letter, A4, or legalBanner paper4 x 6 Photo PaperPaper heavier than 24 lb. (135 gsm) or lighter than 16 lb. (60 gsm)Paper with perforationsPhoto paper other than HP Photo PapersEnvelopesTransparency film other than HP PremiumHeavyweight paper other than HP PremiumMultiple-part forms or label stock

tips for loading other types of paper in the main tray

The following table provides guidelines for loading certain types of paper and transparency film. For best results, adjust the paper settings each time you change paper types and paper sizes. For more information, see choose the paper tray and set the paper type on page 13.

papertips
HP papers

HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting

 

 

side of the paper, and then insert paper with the arrow side facing up.

 

HP Premium or Premium Plus Photo Paper: Load the glossy (print) side

 

 

down. Always load at least five sheets of regular paper in the main

 

 

tray first, and then place the photo paper on top of the regular paper.

 

HP Premium Inkjet Transparency Film: Insert the film so that the white

 

 

transparency strip (with arrows and the HP logo) is on top and is

 

 

going into the tray first.

 

HP Iron-On T-shirt Transfers: Flatten the transfer sheet completely

 

 

before using it; do not load curled sheets. (To prevent curling, keep

 

 

transfer sheets sealed in the original package until you are ready to

 

 

use them.) Manually feed one sheet at a time, with the unprinted side

 

 

facing down (the blue stripe faces up).

 

HP Greeting Cards, Glossy Greeting Cards, or Textured Greeting

 

 

Cards: Insert a small stack of HP greeting-card paper, with the print-

 

 

side down into the main tray until it stops.

 

 

Legal-size paper

Fully extend the paper-length guide and make sure that the main tray is

 

pushed in all the way.

12

load originals and paper