hp digital copier series

4Remove the new printhead from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape.

Caution! Do not touch the copper contacts, the printhead tower, or the ink nozzles.

 

 

Printhead tower

 

 

Copper contacts

 

 

Ink nozzles

 

Plastic tape

handle ink cartridges

removing the plastic tape from the printhead

5Match the color on the top of the printhead to the color on the printhead carriage.

6Push the new printhead firmly down into the appropriate slot using the printhead handle. Do not touch the printhead tower, and do not remove the printhead handle.

7Move the print carriage latch down, and make sure the loops catch the hooks. Snap the latch into place, then close the print carriage access door.

8After the message appears in the front-panel display, press Enter to align the printheads.

Before you replace or clean ink cartridges, you should know the part names and how to handle them.

40

maintain your hp digital copier

Page 46
Image 46
HP 510 manual Handle ink cartridges