Staple print jobs
NOTE: For staple job capacity see
Select the stapler at the control panel for printed jobs
1.Touch Administration and then touch Device Behavior.
2.Touch
3.Touch Staples.
4.Touch the option that you want to use: One Left Angled, One Right Angled, Two Left, Two Right, and Two Top.
NOTE: Selecting the stapler at the printer control panel changes the default setting. It is possible that all print jobs will be stapled. However, settings that are changed in the printer driver override settings that are changed at the control panel.
Select the stapler in the printer driver for printed jobs (Windows)
NOTE: The following procedure changes the default setting to staple all print jobs.
1.Open the printer driver. See Change
2.On the Output tab, click the
Select the stapler in the printer driver for printed jobs (Mac)
Select the stapler by creating a new preset in the printer driver.
1.Open the printer driver. See Change
2.Create the new preset.
Configure the device to stop or continue when the staple cartridge is empty
You can specify whether the product stops printing when the staple cartridge is empty or if it continues printing but does not staple the jobs.
1.Touch Administration and then touch Device Behavior.
2.Touch
3.Touch Staples Out.
4.Touch the option that you want to use:
●Select Stop to stop all printing until the staple cartridge is replaced.
●Select Continue to continue printing jobs without stapling them.
126 Chapter 8 Use product features | ENWW |