Understand lights on the formatter

Three LEDs on the formatter indicate that the product is functioning correctly.

1

2

1Heartbeat LED

2HP Jetdirect LEDs (This LED exists only if HP Jetdirect is installed.)

HP Jetdirect LEDs

The embedded HP Jetdirect print server has two LEDs. The yellow LED indicates network activity, and the green LED indicates the link status. A blinking yellow LED indicates network traffic. If the green LED is off, a link has failed.

For link failures, check all of the network cable connections. In addition, you can try to manually configure the link settings on the embedded print server by using the product control-panel menus.

1.Scroll to and touch Administration.

2.Touch Initial Setup.

3.Touch Networking and I/O.

4.Touch Embedded Jetdirect or EIO <X> Jetdirect.

5.Touch Link Speed.

6.Select the appropriate link speed.

7.Touch Save.

Heartbeat LED

The heartbeat LED indicates that the formatter is functioning correctly. While the product is initializing after you turn it on, the LED blinks rapidly, and then turns off. When the product has finished the initialization sequence, the heartbeat LED pulses on and off.

If the heartbeat LED is off, the formatter might have a problem. Replace or reseat the formatter.

ENWW

Understand lights on the formatter 257