HP CM6049f MFP manual Push down on the Dimm until both latches engage the Dimm

6.To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM slot, lift the DIMM up at an angle, and pull it out.

XOXOXO

XOXOXO

XOXOXO

XOXOXO

XOXOXOXO

XOXOXO XOXOXO

XOXOXO XOXOXO XOXOXO XOXOXO

7.Remove the new DIMM from the antistatic package. Locate the alignment notch on the bottom edge of the DIMM.

8.Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the metal contacts are not visible.

XOXOXO

XOXOXO

XOXOXO

XOXOXO

XOXOXOXO

XOXOXO XOXOXO

XOXOXO XOXOXO XOXOXO XOXOXO

9.Push down on the DIMM until both latches engage the DIMM.

	XIOXIO
	XIOXIOXIXO	OXIXO
XIOXIO
XIOXIOXIXO	OXIXO
OXIXO
OXIXO
XOXOXO

NOTE: If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the correct type of DIMM.

ENWW Replace supplies 197