HP CM6049f MFP manual Tray Behavior Use Requested Tray Exclusively default, First, Manually Feed

Table 2-15Device Behavior menu (continued)

Menu item	Sub-menu item	Sub-menu item	Values	Description
Tray Behavior	Use Requested Tray		Exclusively (default)	Control how the device handles jobs that
			First	have specified a specific input tray.
	Manually Feed		Always (default)	Specify how a prompt should appear when
	Prompt		Unless Loaded	the type or size for a job does not match the
				specified tray and the device pulls from the
				multipurpose tray instead.
	PS Defer Media		Enabled (default)	Select either the PostScript (PS) or HP
			Disabled	paper-handling model.
	Use Another Tray		Enabled (default)	Turn on or off the control-panel prompt to
			Disabled	select another tray when the specified tray is
				empty.
	Size/Type Prompt		Display (default)	Control whether the tray configuration
			Do not display	message appears whenever a tray is opened
				or closed.
	Duplex Blank Pages		Auto (default)	Control how the device handles two-sided
			Yes	jobs (duplexing).
	Image Rotation		Left to Right	Image rotation allows users to put paper in
			Right to Left	the input tray using the same orientation
				regardless of whether there is a finisher
			Alternate	installed.
				NOTE: The image rotation set in this menu
				will be applied any time a job does not
				request stapling or when the requested
				stapling could not be applied because of
				unsupported media or when the stapler is
				unavailable.
				Select Left to Right to rotate the image as if it
				were going to be bound on the left. This
				setting is appropriate for print jobs where
				reading from left to right is the cultural norm.
				This is the default setting.
				Select Right to Left to rotate the image as if it
				were going to be bound on the right. This
				setting is usually appropriate for print jobs
				where reading from right to left is the cultural
				norm.
				Select Alternate to use a different loading
				orientation that might work better with
				preprinted forms that are used on legacy
				products.

ENWW Device Behavior menu 41