![](/images/backgrounds/292626/hp-color-laserjet-cm6049f-mfp-users-manual-54496858x1.png)
Table
Menu item | Values | Description | ||
|
|
|
|
|
Multifunc Finisher | Operation Mode | Mailbox |
or |
| Stacker |
| Function Separator |
This menu appears when the HP
Allows you to set the default operation mode. Mailbox assigns a user or group of users to each output bin. Stacker treats all of the output bins as a single large bin. When one bin gets full, jobs are automatically routed to the next bin. Function Separator specifies a default bin for specific types of jobs such as faxes or copies (stapler/stacker only).
Staples | None | Sets the default staple selection for |
| One Left Angled | documents sent to the device when no staple |
| value is specified. | |
| One Right Angled |
|
| Two Left |
|
| Two Right |
|
| Two Top |
|
|
|
|
Staples Out | Stop | Sets the default behavior when a job |
| Continue | specifies stapling and the stapler is out of |
| staples. Stop stops printing if the stapler runs | |
|
| out of staples. Continue allows a job to |
|
| continue printing even when the device is out |
|
| of staples. |
|
|
|
Offset | Off | Turns the job offset feature on or off. When |
| On | job offset is on, each copy of a job is shifted |
| to one side in the output bin in order to keep | |
|
| each copy separate from the others. |
|
|
|
A4/Letter Staple | Normal | Controls the speed of the print engine to |
| Alternate 1 | prevent paper jams by using the stapler |
| buffer. | |
| Alternate 2 | NOTE: The stapler buffer may or may not |
|
| be used depending on the selected media |
|
| type or on the sensed media type, if |
|
| Autosense Mode is enabled. |
|
| If the Normal setting is enabled, the engine |
|
| speed will be normal by using the stapler |
|
| buffer whenever possible. |
|
| If the Alternate 1 setting is enabled, and the |
|
| engine is in Autosense Mode, the engine |
|
| slows down to prevent jams. If the product is |
|
| NOT in Autosense Mode, the engine |
|
| performs at normal speed, using the stapler |
|
| buffer whenever possible. |
|
| If the Alternate 2 setting is enabled, the |
|
| engine always slows down to prevent jams, |
|
| never using the stapler buffer. |
|
|
|
42 Chapter 2 Control panel | ENWW |