Use the control panel
The control panel has a VGA touchscreen that provides access to all device functions. Use the buttons and numeric keypad to control jobs and the device status. The LEDs indicate overall device status.
The control panel includes a touchscreen graphical display,
| 1 | 2 | 3 | 4 |
10 |
|
|
|
|
9 |
|
|
| 5 |
8 |
|
|
| 6 |
|
|
|
| |
7 |
|
|
|
|
|
|
| ||
1 | Touchscreen graphical display | Use the touchscreen to open and set up all device functions. | ||
|
|
| ||
2 | Numeric keypad | Allows you to type numeric values for number of copies required and other | ||
|
| numeric values. |
| |
|
|
| ||
3 | Reset button | Resets the job settings to factory or | ||
|
|
| ||
4 | Sleep button | If the device is inactive for a long period of time, it automatically enters a | ||
|
| sleep mode. To place the device into sleep mode or to reactivate the device, | ||
|
| press the Sleep button. |
| |
|
|
| ||
5 | Stop button | Stops the active job and opens the Job Status screen. | ||
|
|
| ||
6 | Start button | Begins a copy job, starts digital sending, or continues a job that has been | ||
|
| interrupted. |
|
|
|
|
| ||
7 | Attention light | The Attention light indicates that the device has a condition that requires | ||
|
| intervention. Examples include an empty paper tray or an error message | ||
|
| on the touchscreen. |
| |
|
|
| ||
8 | Ready light | The Ready light indicates that the device is ready to begin processing any | ||
|
| job. |
|
|
|
|
| ||
9 | Data light | The Data light indicates that the device is receiving data. | ||
|
|
| ||
10 | Turn the dial to adjust the contrast of the touchscreen display for your | |||
|
| viewing angle. |
|
|
|
|
|
|
|
12 Chapter 2 Control panel | ENWW |