HP CM6049f MFP manual Security Print Sec, Secure Web, Reset Security, Diagnostics Embedded Tests

Table 2-11Jetdirect menus (continued)

Menu item	Sub-menu item	Sub-menu item	Values and Description
Security	Print Sec Page		Yes (default): Prints a page that contains the current
			security settings on the HP Jetdirect print server.
			No: A security settings page is not printed.
	Secure Web		For configuration management, specify whether the
			embedded Web server will accept communications
			using HTTPS (Secure HTTP) only, or both HTTP and
			HTTPS.
			HTTPS Required (default): For secure, encrypted
			communications, only HTTPS access is accepted. The
			print server will appear as a secure site.
			HTTP/HTTPS optional: Access using either HTTP or
			HTTPS is permitted.
	IPSEC		Specify the Firewall status on the print server.
			Keep: Firewall status remains the same as currently
			configured.
			Disable: Firewall operation on the print server is
			disabled.
	Reset Security		Specify whether the current security settings on the
			print server will be saved or reset to factory defaults.
			No: The current security settings are maintained.
			Yes: Security settings are reset to factory defaults.
Diagnostics	Embedded Tests		This menu provides tests to help diagnose network
			hardware or TCP/IP network connection problems.
			Embedded tests help to identify whether a network fault
			is internal or external to the device. Use an embedded
			test to check hardware and communication paths on
			the print server. After you select and enable a test and
			set the execution time, you must select Execute to
			initiate the test.
			Depending on the execution time, a selected test runs
			continuously until either the device is turned off, or an
			error occurs and a diagnostic page is printed.
		LAN HW Test	CAUTION: Running this embedded test will erase
			your TCP/IP configuration.
			This test performs an internal loopback test. An internal
			loopback test will send and receive packets only on the
			internal network hardware. There are no external
			transmissions on your network.
			Select Yes to choose this test, or No to not choose it.
		HTTP Test	This test checks operation of HTTP by retrieving
			predefined pages from the device, and tests the
			embedded Web server.
			Select Yes to choose this test, or No to not choose it.

32 Chapter 2 Control panel ENWW