Table 2-16Print Quality menu (continued)

Menu item

Sub-menu item

Values

Description

 

 

 

 

Calibration/Cleaning

 

 

 

 

 

 

 

 

Process Cleaning Page

Process

Use this feature to create and process a cleaning page

 

 

 

for cleaning excess toner off the pressure roller in the

 

 

 

fuser. The process takes up to 2.5 minutes.

 

 

 

 

 

Quick Calibration

Calibrate

Performs partial product calibrations.

 

 

 

 

 

Full Calibration

Calibrate

Performs all product calibrations.

 

 

 

 

 

Delay Calibration At

No

This menu controls the timing of the calibration when

 

Wake/Power On

Yes (default)

the printer wakes up or is turned on.

 

 

 

 

 

 

Select No to have the printer calibrate immediately

 

 

 

when it wakes up or is turned on. The device will

 

 

 

not print any jobs until it finishes calibrating.

 

 

 

Select Yes to enable a device that is asleep to

 

 

 

accept print jobs before it calibrates. The device

 

 

 

only accepts new jobs for a short time. It may start

 

 

 

calibrating before it has printed all the jobs it has

 

 

 

received.

 

 

 

NOTE: For the best results, allow the device to

 

 

 

calibrate before printing. Print jobs performed before

 

 

 

calibration may not be of the highest quality.

 

 

 

 

ENWW

Print Quality menu 51