HP CM6049f MFP manual Declaration of Conformity

Declaration of Conformity

Declaration of Conformity

according to ISO/IEC 17050–1 and EN 17050–1

Manufacturer's Name:	Hewlett-Packard Company
	DoC#: BOISB-0601–02–rel.6.0
Manufacturer's Address:	11311 Chinden Boulevard,
	Boise, Idaho 83714-1021, USA
declares that the product
Product Name:	HP Color LaserJet CM6030/CM6040/CM4349 MFP series
Accessories:3)	CB473A – 1x500-sheet input tray/stand
	CB474A – 3x500-sheet input tray/stand
	Q6999A/CC516A – Booklet Maker
	Q6998A/CC517A – 3-Bin Stapler/Stacker
	BOISB-0308-00 – Fax Module
Regulatory Model Number:2)	BOISB-0601-02
Product Options:	ALL

Toner Cartridges/Drums: CB390A, CB381A, CB382A, CB383A, CB384A, CB385A, CB386A,

CB387A, CE830C, CE301C, CE302C, CE303C, CE304C, CE305C, CE306C, CE307C

conforms to the following Product Specifications:

Safety:	IEC 60950-1:2001 / EN60950-1: 2001 + A11
	IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
	GB4943-2001
EMC:	CISPR 22:2005 / EN 55022:2006 – Class A1)
	EN 61000-3-2:2006
	EN 61000-3-3:1995 + A1
	EN 55024:1998+A1 + A2
	FCC Title 47 CFR, Part 15 Class A / ICES-003, Issue 4
	GB9254-1998, GB17625.1–2003
Telecom	TBR-21:1998; FCC Title 47 CFR, Part 684)

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 2004/108/EC and the Low Voltage Directive 2006/95/EC, and the

R&TTE Directive 1999/5/EC (Annex II), and carries the CE-Marking accordingly.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

1)The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.

2)For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name or the product number(s).

3)All worldwide modular approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number BOISB-0308-00 incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.

4)Telecom approvals and standards appropriate for the target countries/regions have been applied to this product, in addition to those listed above.

Boise, Idaho , USA

March 2009

For regulatory topics only:

European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards Europe, Herrenberger Straße 140, D-71034 Böblingen, Germany, (FAX: +49-7031-14-3143) www.hp.com/go/ certificates

USA Contact:	Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA,
	(Phone: 208-396-6000)

ENWW Declaration of Conformity 285