Table 2-11Jetdirect menus (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

 

Primary DNS

Use this item to specify an IPv6 address for a primary

 

 

 

DNS server that the print server should use.

 

 

 

 

 

 

Secondary DNS

Use this item to specify an IPv6 address for a

 

 

 

secondary DNS server that the print server should use.

 

 

 

 

 

Proxy Server

 

Specifies the proxy server to be used by embedded

 

 

 

applications in the device. A proxy server is typically

 

 

 

used by network clients for Internet access. It caches

 

 

 

Web pages, and provides a degree of Internet security,

 

 

 

for those clients.

 

 

 

To specify a proxy server, enter its IPv4 address or

 

 

 

fully-qualified domain name. The name can be up to

 

 

 

255 octets.

 

 

 

For some networks, you may need to contact your

 

 

 

Independent Service Provider (ISP) for the proxy

 

 

 

server address.

 

 

 

 

 

Proxy Port

 

Type the port number used by the proxy server for

 

 

 

client support. The port number identifies the port

 

 

 

reserved for proxy activity on your network, and can be

 

 

 

a value from 0 to 65535.

 

 

 

 

IPX/SPX

Enable

 

Off: Disable the IPX/SPX protocol.

 

 

 

On (default): Enable the IPX/SPX protocol.

 

 

 

 

 

Frame Type

 

Selects the frame-type setting for your network.

 

 

 

Auto: Automatically sets and limits the frame type to

 

 

 

the first one detected.

 

 

 

EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-

 

 

 

type selections for Ethernet networks.

 

 

 

 

AppleTalk

Enable

 

Off: Disable the AppleTalk protocol.

 

 

 

On (default): Enable the AppleTalk protocol.

 

 

 

 

DLC/LLC

Enable

 

Off: Disable the DLC/LLC protocol.

 

 

 

On (default): Enable the DLC/LLC protocol.

 

 

 

 

ENWW

Initial Setup menu 31