Print on both sides of the page (duplex printing)
Use automatic duplex printing
1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways:
●For tray 1, load the letterhead paper
●For all other trays, load the letterhead paper
2.On the File menu, click Print.
3.Open the Layout menu.
4.Next to
5.Click Print.
Print on both sides manually
1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways:
●For tray 1, load the letterhead paper
●For all other trays, load the letterhead paper
CAUTION: To avoid jams, do not load paper that is heavier than 105 g/m2
2.On the File menu, click Print.
3.On the Finishing menu, select Manually Print on 2nd Side.
4.Click Print. Follow the instructions in the
5.Go to the printer, and remove any blank paper that is in tray 1.
6.Insert the printed stack
7.If prompted, press the appropriate
Set the stapling options
If a finishing device that has a stapler is installed, you can staple documents.
1.On the File menu, click Print.
2.Open the Finishing menu.
3.In the Stapling Options
ENWW | Use features in the Macintosh printer driver 77 |