HP Medical Archive Solution manual LDR Configuration, LDR Service Configuration Settings

HPMA User Guide

LDR Configuration

The Local Distribution Router (LDR) supports the standard service settings to change the labeling of the service and add notations. It also offers settings to control the state of the storage and protocol compo- nents. The full set of configurable settings is shown below.

Table 64: LDR Service Configuration Settings

Prompt	Type	Description
LDR State	Pull-down	Sets the service state:
	menu	• Online—normal operation
Storage State	Pull-down	This is a duplicate of the setting on the component’s
	menu	main configuration settings. See page 165.
DICOM State	Pull-down	This is a duplicate of the setting on the component’s
	menu	main configuration settings. See page 166.
HTTP State	Pull-down	This is a duplicate of the setting on the component’s
	menu	main configuration settings. See page 167.
User Label	String	This string is the identification tag that appears in the
		Navigation Tree, map views, and as the heading in
		the Content frame for this service on this node.
Notes	Text	Free form notes allowing you to add descriptive text
		related to this service on this node. These notes
		appear in the Node Information section of the
		Overview page.

LDR Components

In addition to the standard service settings, the LDR also supports the following components:

•Storage

•DICOM

•HTTP

•Connectivity

164

HP Medical Archive