Configuration

Storage

This component provides data on the object storage space and the objects processed. The Storage component tracks the total amount of object storage space being used and the space available.

The configuration settings allow you to set the active state of the storage component, force the storage to read-only on restart, and reset the “OCOR” alarm.

Table 65: LDR X Storage Component Configuration Settings

Prompt

Type

Description

 

 

 

Storage State

Pull-down

Sets the component to be:

 

menu

• Standby— When Storage is taken offline

 

 

(standby), the DICOM and HTTP interfaces are

 

 

forced into Redirect state and no replications are

 

 

made to or from the storage node.

 

 

• Online (Read-Only)—tells the grid this service is

 

 

not accepting new content. If DICOM or HTTP

 

 

components are Online, they are forced to

 

 

Online (Read-Only) state.

 

 

• Online—normal operation

 

 

 

Storage Read-Only

Check box

Sets the storage component to be read-only when the

on Startup

 

component is restarted. Otherwise the state is set by

 

 

the service based on the available object storage

 

 

space. If space is low, the component uses

 

 

Online (Read-Only), otherwise it is Online.

 

 

You can use this setting to force the storage to read-

 

 

only even when there is ample available space. This

 

 

can be useful for troubleshooting.

 

 

 

Reset Corrupt

Check box

When selected and applied, the counter attribute for

Objects Count

 

“Corrupt Objects Detected” is reset to zero. This

 

 

clears the “OCOR” alarm.

 

 

 

165

HP Medical Archive