Date & Time
This setting allows you to set the date/time format as well as the current date and time for the camera.
The camera uses the date/time format to display the date information in Playback and in the Date & Time Imprint feature (see page 81).
1.In the Setup Menu (see page 113), select Date & Time.
2.Use the 
buttons to adjust the value of the highlighted selection.
3.Press the 
buttons to move to the other selections.
4.Repeat steps 2 and 3 until the correct date/time format, date, and time are set.
5.Press 
to save the setting and return to the Setup Menu.
The new setting remains in effect until it is changed again, even when you turn the camera off.
NOTE: The Date & Time settings remain current as long as the camera battery has a charge, the battery is removed for less than 10 minutes, or the camera is connected to an HP AC power adapter.
Using the Setup Menu 119
