Recording Video Clips

1.Press until appears in the upper left corner of the Image Display, then frame the subject.

2.To start recording, press and

release the Video button. A video counter, , REC, and instructions for ending the video appear on the Image Display. The camera may emit a sound to indicate that recording has begun (see Camera Sounds on page 115).

3.To stop recording video, press and release the Video button; otherwise, the video continues recording until the camera runs out of memory.

NOTE: If you have a slow memory card, the video clip may end before you press the Video button. Either set your video quality to a lower setting (see page 70) or purchase a memory card marked High Performance, Pro, Ultra, or High-Speed.

After recording stops, the last frame of the video clip appears in Instant Review (see page 117). To delete the video clip, press , then select This Image from the Delete sub-menu. You can also use Playback (see page 83) to review or delete video clips or extract frames from them (see page 86). You cannot, however, change the audio after you have recorded a video clip.

NOTE: If you use Self-Timer or Self-Timer - 2 Shots (see page58)while recording video clips, the camera records only one video clip.

Taking Pictures and Recording Video Clips

35