4. Charge the Battery

You can charge a battery in the camera (explained here) or in the extra battery bay of the camera dock or in the

HP Photosmart quick recharger (see Purchasing Camera Accessories on page 175).

1.Plug the power cord into the HP AC power adapter. If more than one power cord is in the box, use the cord that is appropriate for power outlets in your country or region. Plug the other end of the power cord into an electrical outlet.

2.Attach the thin cord from the HP AC power adapter to the cradle as shown.

3.Place the camera in the cradle. The Power light on the back of the camera starts blinking to show that the battery is charging.

When the Power light stops blinking, the battery is fully charged. Recharging usually takes 4-6 hours in the camera. You can continue using the camera while the battery is recharging.

NOTE: The camera may get warm while the battery is charging, as well as after prolonged use under battery power. This is normal.

Getting Started

15