Configuring system Bios | HP VA799UT 799UT#ABA, Z400 H2D81US

Configuring system BIOS

Configure the system BIOS to enable embedded SATA RAID functionality.

1.To enter the system BIOS setup, press F10.

2.Use the arrow keys to highlight the desired language, and then press Enter.

3.Use the arrows to highlight Storage>Storage Options, and then press Enter.

4.Use the up or down arrow key to highlight SATA Emulation.

5.Use the left or right arrow key to select RAID+AHCI.

6.To accept the new setting, press F10.

7.Use the arrows to highlight Advanced>Power-On Options, and then press Enter.

8.Use the up or down arrow key to highlight POST Messages.

9.Use the left or right arrow key to select Enable.

10.To accept the new setting, press F10.

11.Use the arrow keys to highlight Advanced>Device Options, and then press Enter.

12.Use the up or down arrow key to highlight SATA RAID Option ROM Download, and then press Enter.

13.Use the left or right arrow key to select Enable.

14.To accept the new setting, press F10.

15.Use the arrows to highlight File>Save Changes and Exit, and then press Enter.

16.Press F10 when prompted.

ENWW	Configuring SATA RAID devices 147

Image 159

HP VA799UT 799UT#ABA, Z400 H2D81US manual Configuring system Bios

Contents

HP 400 Workstation Trademark Credits Copyright Information Warranty Guide topics About this guide Iv About this guide Table of contents System management Restoring the operating system Replacing components Customer self-repair Removing and installing components Diagnostics and troubleshooting Configuring RAID devices Configuring password security and resetting Cmos Appendix D Locating HP resources179 Xii Topics Product featuresProduct overview System board architecture Processor technology Memory technologyGraphics Expansion card slots Additional features Description Workstation componentsChassis components 1Workstation component descriptions 2Front panel connectors Symbol DescriptionFront panel components Rear panel components 3Rear panel connectors Power supply voltages Workstation specificationsPhysical characteristics Power supply description Power supply currents 5Maximum current per railVoltage rail Power supply specifications Power consumption and heat dissipation6Power supply specifications System fans Resetting the power supply Non-operating Environmental specifications7HP Workstation environmental specifications Temperature Humidity Altitude Shock Vibration Energy Star Qualification Disabling EUP compliance mode EUP compliance modeAccessibility Hyper-threading Enabling EUP compliance mode HP Cool Tools Ensuring proper ventilation 6Proper workstation placement Setting up the operating system Setting up the Microsoft operating system Installing or upgrading device driversTransferring files and settings to your Windows workstation Installing with the HP driver CD Setting up Red Hat Enterprise Linux Upgrading the Bios Setting up Novell SledInstalling and customizing Red Hat-enabled workstations Updating the workstation after first boot Determining current Bios Upgrading device drivers Upgrading Bios Restoring the operating system Restore methods Ordering backup software Restoring Windows Vista Ordering the RestorePlus! mediaRestoring the operating system Restoring Windows XP Professional Creating RestorePlus! media Creating HP Backup and Recovery Hpbr media Using the recovery partition Creating restore mediaUsing RestorePlus Using Hpbr Restoring Novell Sled System management Computer Setup F10 functionality Computer Setup F10 Utility Enww Accessing the Computer Setup F10 Utility Computer Setup F10 Utility menu 1Computer Setup F10 Utility menu descriptionsHeading Option Description Disable 16 is the default As a bootable device Enabled by the operating system MWAITE-AWARE OS PCI VGA Enww Section topics Workstation management Installing a remote system Initial workstation configuration and deployment Copying a setup configuration to a single workstation Replicating the setup Copying a setup configuration to multiple workstations Altiris Client Management Solutions Updating and managing softwareHP Client Manager Software System Software Manager Proactive Change NotificationSubscribers Choice ROM Flash Remote ROM FlashHPQFlash Recovering the workstation from Boot Block Recovery mode FailSafe Boot Block ROM Asset tracking 2Security features overviewFeature Purpose How it is established Workstation security Sata hard disk drive security Feature Purpose DriveLock applications Using DriveLock Select SecurityDriveLock Security Enabling DriveLock Password security Entering a power-on password Establishing a power-on password using workstation setup Changing a power-on or setup password Entering a setup password Language Delimiter Deleting a power-on or setup passwordNational keyboard delimiter characters 3National keyboard delimiter characters Side access panel solenoid lock Clearing passwordsSide access panel sensor Smart Cover Sensor optional Setting the side access panel sensor protection level Thermal sensors Fault notification and recoveryECC fault prediction Drive Protection System Changing the power button configuration Dual-state power button Replacing components Enww Service considerations ESD informationGenerating static Method Voltage Preventing ESD equipment damagePersonal grounding methods and equipment 1Static shielding protection levels Recommended ESD prevention materials and equipment Grounding the work area Cables and connectors Tools and software requirementsSpecial handling of components Lithium coin cell battery Customer self-repairHard disk drives Component Removing and installing componentsComponent locations 2System board components ID Predisassembly procedures Cable lock optional Disassembly order3Workstation component installation To install Remove Then remove Replace 2Removing the cable lock Replacing components Side access panel Removing the side access panelInstalling the side access panel Side access panel sensor optional Removing the side access panel sensorInstalling the side access panel sensor Side access panel solenoid lock Removing the side access panel solenoid lockInstalling the side access panel solenoid lock Bezel Front panel I/O device assemblyInstalling the front bezel Removing the front panel I/O device assembly Enww Installing the front panel I/O device assembly Removing the power button assembly Power button assembly Installing the power button assembly Removing an optical disk drive from the optical bay Optical disk drive 12Removing the optical disk drive Replacing components Installing an optical disk drive in the optical bay 14Connecting power and data cables Replacing components Installing the workstation speaker Workstation speakerRemoving the workstation speaker Power supply Removing the power supplyInstalling the power supply 4Power connector description Power connections Rear system fan assembly Removing the rear system fan assemblyInstalling the rear system fan assembly Memory Dimm installation guidelinesDimm installation order Supported Dimm configurations Bios errors and warnings Removing a Dimm Installing a Dimm 22Seating the Dimm Secure the socket levers Expansion card slot identification Slot identification and descriptionType Card configuration restrictions for power supplies Choosing an expansion card slot 6Workstation PCIe compatibility matrix Expansion cardExpansion card slot description Removing an expansion card Enww Installing an expansion card Battery Removing the batteryInstalling the battery Removing the hard disk drive Installing the hard disk driveInstallation guidelines Hard disk drive Installation Enww Enww Removing the CPU heatsink CPU heatsink Installing the CPU heatsink Enww Removing a CPU CPU Installing a CPU Installing the system board System boardRemoving the system board Product recycling Diagnostics and troubleshooting Locating ID labels Calling technical support Locating warranty information Diagnosis at startup Diagnosis guidelines Diagnosis during operation Troubleshooting checklist Support HP troubleshooting resources and toolsTroubleshooting a problem HP Help and Support Center Helpful hints Product Change NotificationsAt startup Troubleshooting scenarios and solutions During operationCustomizing the monitor display Solving minor problems 1Minor problemsProblem Cause Possible Solution Possible Solution Problem Cause Problem Cause Solution Solving power supply problemsTesting power supply 2Power supply problems Solving diskette problems 3Diskette problemsSelect FilePropertiesTools F1440 Solving hard drive problems4Hard drive problems Boot in StorageBoot Order SecurityRestore Master Boot Record 5Display problems Solving display problems Support.html Select StartAll Programs AccessoriesSystem Devices 6Audio problemsProperties For this CD-ROM device DIR C\ printer port Self-troubleshooting with HP Vision Field DiagnosticsSolving printer problems 7Printer problems Overview Downloading and accessing HP Vision Field Diagnostics Survey tab User interface Categories Levels include Test tab Enww Errors tab Status tabHistory tab Help tab Diagnostic codes and errors Downloading the latest diagnostic utilityDiagnostic LED and audible beep codes Activity Possible cause 8Diagnostic lights and audible codes Activity Possible cause Recommended action See the ROM Flash section of the Maintenance and Service LED color definitions 9LED color definitionsLED state LED color System status Post error messages 10POST error messagesScreen message Probable cause Recommended action Verify that a memory module cooling fan is installed Dimm Configuration DIMMs are not installed correctly not CPU Overtemp Insufficient processor cooling or Replace the processor with a compatible one Screen message Probable cause Configuring RAID devices Maximum hard drive configurations1Maximum hard drives Attaching Sata HDDs Configuring Sata RAID devices Configuring system Bios Creating RAID volumes Deleting RAID volumes Supported configurations Configuring SAS RAID devices SAS RAID 0 configuration SAS RAID 1 configuration SAS RAID 1E configuration Configuring password security and resetting Cmos Preparing to configure passwords Resetting the password jumper Clearing and Resetting the CmosUsing the Cmos Button Using the Computer Setup F10 Utility to Reset Cmos Enww Workstation Ethernet Pin 10/100-MbSignal 1000-Mb Connector pinsWorkstation keyboard Pin Signal Workstation mouse Pin Signal Signal Pin Data Cable Power Cable Workstation USB Pin SignalPin Signal Sata drive Pin Signal Receptacles SAS drive Segment PinPlug Cable Workstation VGA Pin Signal Display port DVI-I cable Pin Signal Main power cable, P1 CPU power cable, P3 Graphics aux. power cables, P12 Pin Signal ColorInternal USB 1 Pin Signal Workstation rear system fan Pin Signal Internal USB 1Internal USB 2 Workstation FDD Pin Signal Workstation CPU fan Pin Signal Workstation internal serial Signal Pin Designator Silk screen Component System board designators Appendix B System board designators Routine Care General cleaning safety precautionsCleaning the workstation case Cleaning the keyboard Cleaning the mouse Cleaning the monitor Product information on Locating HP resources All Programs HP Cool Tools Product informationTable D-1Product information Topic Location Table D-2Product support Product support Product documentation Table D-3Product documentationCustomer Bulletins, or Customer Notices Table D-4Product diagnostics Product diagnostics InformationView general system information Product updatesTable D-5Product updates TaskUse Tools to view...ToolsMy Computer Appendices Index Enww