Removing a DIMM
To remove a DIMM:
1.Disconnect power from the workstation (see Predisassembly procedures on page 66).
2.Remove the side access panel (see Removing the side access panel on page 69).
CAUTION: To ensure that DIMMs are not damaged during removal or installation, power off the workstation and unplug the power cord from the AC power outlet. If you do not unplug the power cord before installing memory, the modules might be damaged and the workstation will not recognize the memory changes.
3.Push gently outward on the DIMM socket levers 
as shown in the following figure. Figure
4.Lift the DIMM straight up 2 and out of the socket, then store the DIMM in an antistatic bag.
ENWW | Removing and installing components 87 |
