Table 6-10 POST error messages (continued)
Screen message | Probable cause | Recommended action |
Processor feature set is insufficient for Change the BIOS settings or upgrade the processors. current system settings. The BIOS
settings do not match the support provided by the processor
A processor feature is incompatible with the memory configuration.
Restore the previous memory configuration.
ERROR: Invalid 1394 GUID | No electronic serial number is stored | To assign a serial number , select Security >System |
(Invalid electronic serial | with the system. | IDs in the Computer Setup (F10) Utility. |
number) |
|
|
|
|
|
ERROR: Invalid electronic | No electronic serial number is stored | To assign a serial number , select Security >System |
serial number (no number) | with the system | IDs in the Computer Setup (F10) Utility. |
|
|
|
ERROR: An unsupported | Unsupported processor detected. | Replace the processor. |
processor is installed. System |
|
|
halted |
|
|
|
|
|
ERROR: A processor requiring | Unsupported processor detected. | Replace the processor. |
too much power is installed. |
|
|
System halted |
|
|
|
|
|
Invalid electronic serial | Incorrect serial number registered in | Use the Computer Setup (F10) Utility to reset the serial |
number | the system. | number. |
|
|
|
Network Server Mode Active | Keyboard not detected. | Verify that a functioning keyboard is attached to the |
and No Keyboard Attached |
| workstation. |
|
|
|
Processor initialization fails!!! | Processor defective. | Replace the processor. |
|
|
|
144 Chapter 6 Diagnostics and troubleshooting | ENWW |
