Warnings and cautions
WARNING! 
Any surface or area of the equipment marked with this symbol indicates the presence
of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce the risk of injury from a hot component, enable the surface to cool before touching.
WARNING! 
Any surface or area of the equipment marked with this symbol indicates the presence
of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed area marked with this symbol.
WARNING! To reduce the risk of electric shock or damage to your equipment:
—Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
—Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
—Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, health, and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located at http://www.hp.com/ergo and on the documentation CD (if one is included with the product).
WARNING! If a product is shipped in packaging marked with this symbol, 
, the product must always be lifted by two persons to avoid personal injury due to product weight.
CAUTION: Static electricity can damage the electronic components of the workstation. Before beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal object.
CAUTION: Observe the following cautions when removing or replacing a processor:
—Installing a processor incorrectly can damage the system board. Contact an HP authorized reseller or service provider to install the processor. If you plan to install the processor yourself, read all of the instructions carefully before you begin.
—Failure to follow the workstation preparation instructions can result in an improperly installed processor, causing extensive workstation damage.
—Processor socket pins are delicate and bend easily. Use extreme care when placing the processor in the socket.
CAUTION: To prevent damage to the workstation, observe the following Electrostatic Discharge (ESD) precautions while performing the system parts removal and replacement procedures:
—Work on a
—Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body to the ground.
—Create a common ground for the equipment you are working on by connecting the
NOTE: HP accessories are for use in HP Workstation products. They have been extensively tested for reliability and are manufactured to high quality standards.
ENWW | Warnings and cautions 59 |
