Call a Contact

1.On the Phone screen, touch the Contacts tab.

2.Touch desired contact.

3.Touch .

Call a Favorite Contact

1.On the Phone screen, touch the Favorites tab.

2.Touch of your favorite contact. To save a Favorite contact, see “Add Contacts to Favorites” on page 34.

Call a Number with Pause

Use the Pause function to send DTMF tones from your phone. Your phone supports two types of pauses:

Hard Pause: Add a hard pause to indicate that the succeeding numbers are DTMF tones. For every hard pause, a message appears to confirm whether to send the tones.

2-sec Pause: This is a 2-second interval in sending DTMF tones. To increase the interval, add a succession of 2-sec pause. For example, to have an interval of 4 seconds, add two 2-sec pause.

1.On the Phone screen, touch the keypad to enter number to call.

2.To add a hard pause, touch Menu > Add wait. “;” appears to indicate the hard pause

location. To add a 2-sec pause, touch Menu

> Add 2-sec pause. “,” appears to indicate the 2-sec pause location.

3.Touch the keypad again to enter number of the DTMF tone.

Note: Repeat the above procedures to add more pauses.

4.Touch . Your phone dials the number before the hard pause then sends the DTMF tones upon confirmation. For 2-sec pause, your phone will send the DTMF tones automatically after 2 seconds.

Call a Number with Prepend

Prepend is used to add prefix numbers in front of a phone number. For example, if your contact entry is saved without an area code and you are out of town, use the prepend function to add the area code before calling the number.

1.On the Phone screen, touch the Contacts or Call log tab.

2.Touch and hold a name or number from the list.

3.Touch Prepend.

4.Touch the keypad to enter the number you want to add before the phone number.

5.Touch .

User Guide

29

Page 29
Image 29
Kyocera M6000 manual Call a Contact, Call a Favorite Contact, Call a Number with Pause, Call a Number with Prepend