3. Safety Notes

3.2Electrical Safety General specifications

Leica CTR4000, CTR6000 and CTR6500 electron- ics boxes

For indoor use only.

 

Supply voltage:

90Ð250 V~

Frequency:

50Ð60 Hz

Power input:

max. 290 VA

Fuses:

T6.3 A

Ambient temperature:

(IEC 60127-2/3)

15Ð35°C

Relative humidity:

max. 80% to 30°C

Overvoltage category:

II

Pollution degree:

2

Microscope

 

For indoor use only.

 

Supply voltage:

90Ð250 V~

Frequency:

50Ð60 Hz

Power input:

see CTRxxxx

Fuses:

see CTRxxxx

Ambient temperature:

15Ð35°C

Relative humidity:

max. 80% to 30°C

Overvoltage category:

II

Pollution degree:

2

Caution!

Power plugs may only be plugged into an outlet equipped with a grounding contact.

Do not interfere with the grounding function by using an extension cord without a ground wire. Any interruption of the ground wire in- side or outside of the device, or release of the ground wire connection, can cause the device to become hazardous. Intentional ground interruption is not permitted!

Caution!

Peripheral devices with their own or sepa- rate power supplies that are connected to the microscope can have the same protec- tive conductor potential by connecting them to the ground screw on the back of the Leica CTRxxxx electronics boxes. For connections without a ground connector, Leica Service must be consulted.

ebq 100 supply unit*

For indoor use only.

 

Supply voltage:

90Ð250 V~

Frequency:

50Ð60 Hz

Power input:

max. 155VA

Fuses:

2xT2A (IEC 127)

Ambient temperature:

10Ð36°C

Relative humidity:

max. 80% to 30°C

Overvoltage category:

II

Pollution degree:

2

(see enclosed manual)

 

Caution!

Never use any fuses as replacements other than those of the types and the current rat- ings listed here. Using patched fuses or bridging the fuse holder is not permitted. The use of incorrect fuses may result in a fire hazard.

10

Page 10
Image 10
Leica DMI6000B, DMI3000B, DMI4000B Leica CTR4000, CTR6000 and CTR6500 electron- ics boxes, Microscope, Ebq 100 supply unit