Leica DMI3000B, DMI6000B, DMI4000B manual Assembly Motorized 3-plate or scanning stages

6. Assembly

Motorized 3-plate or scanning stages

3-plate stages and scanning stages: after in- stalling the stage, connect the included stage cable (for motorized stages) first to the socket on the stage, then to the CRT6000 or CTR6500 box. The correct place on the box is called ÒXY StageÓ.

A variety of inserts (including heating ones) are available for the normal 3-plate and scanning stages. Install these inserts diagonally from above into the corner with the spring clips. The insert will click into place when seated properly.

!Caution:

Press the spring clip into place only from the side.

Do not press the insert onto the spring clips di- agonally from above, as the insert will not be aligned parallel to the stage and may be bent in the process.

36