Leica DMI3000B, DMI6000B, DMI4000B manual Magnification Changer

￿Change magnification via ￿fixed function buttons on stand

￿Leica Application Suite (LAS) Software

	8. Operation
8.11 Magnification Changer	Leica DMI4000 B and Leica DMI6000 B:
Leica DMI3000 B:	A motorized magnification changer can be used
	optionally. The following magnification factors
A mechanical magnification changer can be
	may be selected: 1.5x, 1.6x, or 2x
used optionally. The following magnification fac-
tors are available: 1.5x, 1.6x and 2x	The selected factor is displayed on	the
A slider switches between 1x and the magnifica-	LeicaScreen and in the relevant field of	the
	Leica Application Suite (LAS), and is taken into
tion factor. The mechanical magnification
	account when calculating the total magnifica-
changer affects the eyepieces and the top port.
	tion.
Leica DMI4000 B and Leica DMI6000 B:	The motorized magnification changer affects all
	ports.
A mechanical magnification changer can be
used optionally. The following magnification fac-	Pressing the left button (117.1) switches	be-
tors are available: 1.5x, 1.6x and 2x
	tween the possible magnification factors; press-
A slider switches between 1x and the magnifica-	ing the right button selects the factor 1x.
tion factor.
The mechanical magnification changer affects
the eyepieces and the top port.	Note:
The selected factor is shown in the LeicaDisplay
	a microscope can not have both types (manual
or the relevant window of the Leica Application
Suite (LAS) and taken into account when calcu-	and motorized) of magnification changers.
lating the total magnification.

Fig. 117 Front control panel

1Function buttons for magnification changer

1

99