6. Assembly

¥Next, firmly tighten the two rear screws.

¥Finally, give the front screw a final firm tight- ening.

Fixed stage

Attachable mechanical stages designed to ac- cept a variety of culture dishes are also avail- able for fixed stages. (Fig. 18).

Two screws are included with the attachable mechanical stage. Tighten these screws in the threaded holes on the underside of the fixed stage with the 3mm hex screwdriver. Retighten these screws from time to time after frequent use.

The attachable mechanical stage has been preadjusted in the factory. In the event that the attachable mechanical stage runs out of focus when moving from right to left, this can be cor- rected by LeicaÕs technical service.

Next, remove one or more of the ordered insert frames (Fig. 20) from their packaging and place the insert frame into the precise retention system. The stage, the attachable mechanical stage and the in- sert frame are now ready for use.

Some (not all) inserts are provided with self-ad- hesive scales to permit the coordinates to be read.

Apply these scales to the recesses of the at- tachable mechanical stage.

Fig. 20 a, b, c

Inserts for attachable mechanical stage (micromanipulation stage)

a

Fig. 19 a, b Inserts for attachable mechanical stage (fixed stage)

a

b

b

c

34

Page 34
Image 34
Leica DMI6000B, DMI3000B, DMI4000B manual Fixed stage, B, c