35
6. Assembly
Manual fixed micromanipulation stage
To install the attachable mechanical stage for
the manual fixed micromanipulation stage
(Fig.24), proceed as you would for the attach-
able mechanical stage of the standard stage.
The insert frames (Fig. 20a to c) differ at this
point. These are held by two screws on the at-
tachable mechanical stage and changed by re-
leasing the screws.
Fig. 21
Inserts for fixed stages
Fig. 22
Glass insert for
3-plate cross-stage
and scanning stage
Fig. 23
Heater insert
Fig. 24 Installation of attachable mechanical stage
Fig. 25 Installation of attachable mechanical stage