Leica DMI4000B, DMI3000B, DMI6000B manual Variable function buttons on SmartMove

7. Start-up

SET + Cube buttons 1-6

(Leica DMI4000 B and DMI6000 B only)

The SET command can be assigned to a function button of the Leica DMI4000 B.

The selected cube is moved to the loading posi- tion for replacement. ÒLoadÓ appears on the screen. Press the opening button (88.2) to open the drawer and position the appropriate cube. The filter cube will remain in this position after the drawer is closed.

7.5 The SmartMove Remote Control Module

SmartMove knobs

(Leica DMI4000 B and Leica DMI6000 B)

7.6 Illumination

7.6.1 Transmitted light

If your microscope has not yet been set up for Koehler illumination, please continue with the ÒKoehler IlluminationÓ section.

Leica DMI3000 B:

¥Select an objective with moderate magnifica- tion (10xÐ20x).

¥Set the condenser to the bright field position.

¥Place a specimen on the stage.

Use the knobs 89.1 and 89.2 to move the stage in X and Y directions.

The image is focused using the knob 89.3 (Leica DMI6000 B only).

The height of the knobs can be adjusted to a comfortable working position by turning 89.4.

Variable function buttons on SmartMove

¥Focus on the specimen using the focus wheels.

¥Adjust the light intensity.

¥Close the field diaphragm manually until the edge of the diaphragm appears in the field of view.

The variable function buttons are assigned func- tions at the factory that are appropriate to the features of your microscope. They are labeled accordingly. For details on button assignments, please refer to the included identification sheet. For information on the abbreviations used, please refer to the list → p. 62.

Note:

The Leica Application Suite (LAS) software is required for changing the button assignments.

Fig. 89 SmartMove remote control module

1travel in x

2Travel in y

3Focus

4Individual adjustment of button height

5Variable function buttons (factory preset)

1

3

4

2

5

68