Leica DMI3000B, DMI6000B, DMI4000B manual Assembly

6. Assembly

¥Insert the lamp mount, with the burner in- stalled, into the lamp housing and tighten it with the screws (63.8).

¥Test the adjustment of the collector (63.2):

Do not touch the power supply while perform- ing these actions. When closing the lamp housing, ensure that the pins of the contact plug engage in their sockets (63.9).

Tighten the screws of the cover and press the contact plug home.

¥Place the lamp housing in the incident light lamp housing mount (Fig. 53) and fasten it with the clamping screw on the side.

¥Connect the lamp housing to the external power supply (62.1).

Caution!

The burner must be adjusted immediately af- ter lighting.

51