Leica DMI3000B, DMI6000B, DMI4000B manual LeicaScreen following initialization

8. Operation

All of the user's previous settings are restored during the initialization.

!Caution:

The focal position and the lower stop are also retained from one session to the next when power is switched off.

After the initialization is complete, the LeicaScreen will display the status screen with microscope's current settings. Fig. 107 is an example.

Fig. 106 LeicaScreen initialization

Note: (reset function)

The microscope can be reset to its factory de- fault programming:

¥With the stand switched off, press the top three variable function buttons on the left side of the stand.

¥Switch on the power for the stand.

¥Hold the buttons until the initialization is com- plete.

¥The standard information display will now ap- pear in the LeicaScreen (Fig. 106 and 107).

¥Switch the instrument off and back on. The settings are now saved.

Fig. 107 LeicaScreen following initialization

81