Leica DMI3000B, DMI6000B manual Operation Set the stops via, Going to the stops, Go to stops via

8. Operation

￿Set the stops via

￿fixed function buttons on stand

￿Leica Application Suite (LAS) Software

Summary of pictograms

￿lower focus stop not set

￿lower focus stop set

￿		focus position not set
￿
	￿	focus position set
￿

Going to the stops

Go to the lower stop by pressing and holding the Z↓ button.

Go to the focus position by pressing and holding the Z↑ button.

These functions can be assigned to variable function buttons on the stand or SmartMove, or they can be controlled via software.

￿Go to stops via

￿fixed function buttons on stand

￿variable function buttons on stand and SmartMove

￿Leica Application Suite (LAS) Software

Setting the step increments

It is possible to toggle between Fine and Coarse step increments.

The Fine value varies to suit the current objec- tive. Suitable values have been predefined. The assignments can be changed with the Leica Ap- plication Suite (LAS).

When selecting Coarse, the positioning speed is the same for all objectives. Coarse corresponds to the maximum speed.

Note:

The assignment of a specific step increment to an objective not only applies to the Z drive, but also to the step increments assigned to the stage when Precise (→ p. 98) is selected.

￿Switch between Fine and Coarse via

￿variable function buttons on stand and SmartMove

￿Leica Application Suite (LAS) Software

Note:

When going to the stops with the Z↑ and Z↓ but- tons, hold the button until the stop has been reached.

93