Nortel Networks N0060600 manual Hunt Groups system setup, Configuring Hunt Groups

100Chapter 14 Configuring Hunt Groups

Hunt Groups system setup

The main panel shown in Figure 37 lists the Hunt Groups and the parameters that define Hunt Group features.

Figure 37 Hunt Groups

Table 34 describes the fields found on the Hunt Groups main panel. Refer to “Configuring the Hunt Group general settings” on page 103 for notes about working with this table.

Table 34 Hunt Group settings (Sheet 1 of 3)

Field	Values	Description
HG	<01-30>	This number identifies the hunt group to the system. This is also
		the number assigned to the telephone, when you add the
		telephone as a Hunt Group member.
Name	<alphanumeric>	Enter a logical name that describes the group function. This name
		also acts as calling line display for incoming calls.
DN	Read-only (625-654)	Hunt Group DNs begin at 625 by default.
		The DN value can be changed under Configuration >
		Telephony > Dialing Plan > DNs. The DN number can be
		assigned to memory buttons on telephones that are not part of
		the hunt group.

N0060600