149
Chapter 21
Default memory button programming for telephones
Button programming allows you to program the buttons on a telephone with internal and external autodialers, and with programmed feature keys. Assigned line, Hunt group designator, answer DNs buttons, intercom buttons, and handsfree buttons cannot be changed through button programming. These latter features appear in
During startup, the installer chooses one of the available telephony template (PBX or DID). Each profile has a default features set that assigns automatically to the programmable buttons on telephones plugged into the system, unless you configure different settings in the DN record. The default features are listed by telephone model in the following sections:
•“Rules of default button assignment” on page 149
•“7316E digital phone button defaults” on page 150
•“7316 digital phone button defaults” on page 152
•“7406 digital phone button defaults” on page 155
•“7208 digital phone button defaults” on page 153
•“7100 digital phone button defaults” on page 154
•“7000 digital phone button defaults” on page 154
•“IP telephone 2004 and 2050 Software Phone button defaults” on page 155
•“IP telephone 2002 button defaults” on page 157
•“IP telephone 2001 button defaults” on page 157
•“IP telephone 2007 button defaults” on page 158
•“IP audio conference phone 2033 button defaults” on page 162
•“IP Phone 1120E and IP Phone 1140E” on page 166
•“WLAN handset 2210/2211/2212 button defaults” on page 171
•“DMC Portables (413X/414X) (Europe only)” on page 174
Rules of default button assignment
•Line and intercom buttons assigned by default templates can be changed in programming. Handsfree and Answer DN buttons are not assigned by default. When these features are programmed, however, they are automatically assigned to specific buttons.
