Nortel Networks N0060600 manual Telephone line assignment fields Sheet 2, Actions

		Chapter 6 DN records parameters 47
Table 10 Telephone line assignment fields (Sheet 2 of 3)
Attribute	Values	Description
Appearance Type	Ring only, Appr&Ring,	Select how a call on this line appears on the telephone.
	Appr only	If you choose Appr&Ring or Appr only, you can have as many
		simultaneous DID calls as there are target line button appearances.
		If you choose Ring only, you can have as many simultaneous DID
		calls as you have intercom buttons.
		Note: The BCM does not support a mixture of Appr only and Ring
		only appearances for the same line.
		7000 or 7100 digital phones default to Ring only.
		(Model 7000 phones are supported in Europe only)
Appearances	<1-255>	Select the number of appearances of a target line.
(for target lines, only)		Note: The number of appearances that can be assigned to a
		telephone depends on how many buttons with indicators are
		available. Target line appearances cannot overwrite other line
		appearances, Answer DNs, Intercom buttons, or assigned
		Handsfree button.
Caller ID set	<check box>	This prompt only appears for target lines, and for any analog lines
		that provide CLID through an GATM (not all markets).
		When enabled, the telephone displays call information when it is
		available for a call before answer.
		When disabled, no call information is displayed for this line. Choose
		this setting if the telephone does not have a display, or if you do not
		want call information displayed to the user. Disabling this function
		can reduce system resource requirements.
		Note: Only 30 telephones can have this field enabled for any given
		line.
Vmsg Set	<check box>	Select whether an indicator shows on the telephone for a voice
		message waiting on an external voice message system.
		The line must appear on the receiving telephone.
		Note: The Message Waiting Indicator (MWI) is currently supported
		exclusively by Meridian Mail and CallPilot and SL-100, and
		DMS-100.
		MCDN note: If your system is part of an MCDN network connected
		to a Meridian 1 system, and you are using the voice mail system off
		the Meridian 1, you must enable this field.
		Analog lines connected to legacy analog ASM station modules, and
		analog telephones attached to an ATA device, do not provide visible
		message waiting indication. Analog telephones connected to a
		GASM8 support message indicators, if the telephone is set up to
		receive them.
	Note: Contact your voice message service provider to find out if your voice message service
	works with BCM, or if you have any problems with your service.
Priv. Received #	These fields reflect the settings defined under target lines.
(Target lines only)	These are the digit strings that the system uses to identify a call for this telephone.
	Refer to “Trunk/Line Data, main panel” in the BCM 4.0 Networking Configuration Guide
Pub. Received #
	(N0060606).
(Target lines only)
Actions

BCM 4.0 Device Configuration Guide