290Chapter 30 Configuring the music source

Table 82 BcmAmp Player button actions

Button

Explanation

 

 

 

Play - Play selected sound file

 

 

 

Pause - Pause play for selected sound file

 

 

To select and play a sound file

click Next

click Previous

click the sound file you want to play

To play a sound file, click the Play button.

To stop a sound file, click the Pause button.

To pause a sound file, click the Pause button.

Configuring a Network Device to be the IP Music Source

To configure a Network Device to be the IP Music source

1Click Configuration > Applications > Music. The Music panel appears.

Note: A third party application that supports audio streaming is required. It must adhere to the RTP protocol and support one of the following codecs: G.711, G.729, or G.723.

2Select the Streaming Server from the Music Source list.

3Configure the Streaming Server section of the Music panel. Table 7 lists the fields and the associated parameters.

Table 7 Network Device parameters (Sheet 1 of 2)

Attribute

Value

Description

 

 

 

Server

<IP address>

Enter the IP address of the music source.

 

 

 

Server RTP Port

Default port: 2216

Enter the number of the source port used for the music source.

 

 

This is the port the BCM uses to receive music from the music

 

 

source.

 

 

 

N0060600

Page 290
Image 290
Nortel Networks N0060600 manual Configuring a Network Device to be the IP Music Source, Click Previous