174Chapter 21 Default memory button programming for telephones
Table 57 describes the status indicators on your WLAN Handset.
Table 57 Status indicators
No Service
Melody
You are outside the coverage area and cannot receive or place calls. An audible alarm also sounds. Return to the coverage area to reestablish the connection.
Your battery pack charge is low. An audible beep also sounds. Replace your battery pack within two minutes.
You have a new voicemail message.
A melody is played when the WLAN handset is turned on for the first time following a completed charge.
The No Service status indicator appears in the information area of the handset display.
Information area
The Information area shows:
•the extension number of the handset
•a line for general information
•features and call information when the handset is in use
Feature options area
When a feature is activated, or when you are on an active call, the Feature options area shows you the action you must take to proceed.
For example: Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the Ftre soft key and for the three display soft keys. These button labels appear directly above the Feature and display soft keys and to the right of the Ftre label on the display. These button labels vary depending on the feature in use.
The WLAN Handset does not support scrolling. Therefore, any features that require the ability to scroll are not supported.
DMC Portables (413X/414X) (Europe only)
The DECT Handset 413X/414X is a DECT based handset, designed to be used in connection with Nortel wireless communication solutions in potentially explosive environments. The DECT transmitter frequencies of the apparatus are harmonized for these services in the European Community.
X represents the frequency variant of the models:
2 = (1900 - 1920 MHz frequency band)
3 = (1880 - 1885 MHz frequency band)
