Nortel Networks N0060600 manual Also refer to Call log on

Chapter 6 DN records parameters 57

Table 15 Capabilities and Preferences - Preferences panel fields (Sheet 2 of 3)

Setting	Values	Description
Contrast	1 through 9	Adjust the contrast of the display.
		Default: 4
Ring type	1, 2, 3, or 4	Select a distinctive ring pattern type for the telephone.
		Default: 1
Distinct rings in use	<read-only>	This field indicates the distinct ring patterns, if any, are currently in
		effect on any lines, telephones, or Hunt groups on the system.
		Refer to the Warning below.
	Warning:
	If you assign a distinctive ring pattern to a telephone, and that distinctive ring pattern has
	already been assigned to a line, all lines with that ring pattern will be reset to None.
	If you assign a distinctive ring pattern to a line, and that distinctive ring pattern has already
	been assigned to a telephone, all telephones with that ring pattern are reset to pattern 1.
	You also can assign a distinctive ring pattern to a Hunt group.
Aux. ringer	<check box>	Determine whether an auxiliary ringer (if installed) rings for
		incoming calls at this telephone.
		Default: Cleared
Call log options	No autologging	Select how you want the telephone to handle logging calls.
	No one answered	No autologging: No calls are logged automatically.
	Unanswered by me	No one answered: Unanswered calls are logged.
	Log all calls	Unanswered by me: Unanswered calls are logged.
		Log all calls: All calls are noted in the call log.
		Also refer to “Call log” on page 210.
		Default: No one answered
Log space	<numeric>	Allocate a number of Call log spaces from a system-wide pool of
		spaces to the telephone. Also refer to “Setting call log space for the
		system” on page 210.
Log space	<numeric>	Allocate a number of Call log spaces form a system-wide pool or
		spaces to the telephone. Also refer to “Setting call log space for the
		system” on page 210.
Available log space	<read-only>	This setting indicates the total amount of space available for call
		logging on the system.
Reset Call Log	<button>	This button resets the password for the call log if users forget their
Password		password.
Hotline type	None	This feature allows you to define a telephone number that
	Internal	automatically dials when you lift the handset or press the Handsfree
		button, on a telephone.
	External
		Default: None
• Internal	DN:*	Define the internal telephone you want to access.
	Direct dial set	DN:* The DN of the telephone that is automatically dialed when the
		user lifts the handset.
		Direct dial set: Automatically dials a telephone on the system
		defined as a direct dial telephone (direct dial access code).
		Note: If the direct dial telephone is on a remote node of the
		network, ensure that the correct line pools are assigned to the
		telephone to properly route the call.

BCM 4.0 Device Configuration Guide