Nortel Networks N0060600 manual Capabilities and Preferences Capabilities tab

Chapter 6 DN records parameters 53

Figure 13 Capabilities and Preferences - Capabilities tab

Table 14 describes the fields on this panel.

Table 14 Capabilities and Preferences - Capabilities tab (Sheet 1 of 3)

Attribute	Values	Description
Handsfree	None	None: The handsfree feature is not available on all telephone models (7000
	Standard	and 7100 digital phones, 2001 IP phones, DMC portables).(Model 7000
		phones are supported in Europe only)
	Auto
		Standard: The handsfree feature is activated by pressing a button on the
		telephone.
		Auto: The handsfree feature is activated when the telephone receives a call.
		Note: Handsfree must be enabled on any telephone that allows headsets.
		For 7316E digital phones, set Handsfree to Auto.
		7406 digital cordless phone: Handsfree must be enabled for this handset to
		work.
		Speaker volume: Note that the speaker volume returns to the telephone
		default setting for each new handsfree call.
		Default: Auto
Pickup group	None	Assigns this telephone to a pickup group (a group where all telephones ring
	1 to 9	until one is answered).
		Default: None
Page zone	Page zone	Assigns this telephone to a page zone.
	(1 to 6)	A zone is any group of telephones that you want to group together for
	None	paging, regardless of their location. You can assign one of six zones to
		each telephone.
		The maximum number of digital telephones in a page zone is 50.
		The maximum number of digital and IP telephones in a page zone is 60.
		Default: 1
Direct dial	Set 1 to Set 5	Defines whether you can call the direct dial telephone from this telephone
	None	using the direct dial digit.
		Default: 1

BCM 4.0 Device Configuration Guide