![](/images/new-backgrounds/1203528/203528137x1.webp)
69
Chapter 7
Common procedures: copying and renumbering DNs
Task: Understanding common tasks
•“Copying settings to other DNs” on page 69
•“Renumbering DNs” on page 70
Copying settings to other DNs
The Copy command allows you to duplicate programming for a telephone, and apply it to another telephone, a range of telephones, or to all the telephones on the system. If information is copied to a record with an assigned telephone, the copy information replaces the existing settings.
Note: Unique configurations, such as the Name, do not copy over.
To copy telephone configurations
1Select Configuration > Telephony > Sets > All DNs.
2Click the DN number for the record that has the settings you want to copy.
3Click Copy.
4Select the DN to which you want to apply the selected settings.
Note: Select multiple DNs by holding down the control or shift key, and clicking multiple records.
5Click Paste. The following panel appears: