
233
Chapter 27
Display prompts and messages
Use the following information for an explanation of the prompts you see on your telephone. The following tables show the prompt along with a description or required action, as appropriate. Prompts are listed alphabetically within the following categories:
•Common display prompts
•“Viewing active services” on page 244
•“Call log prompts” on page 245
Common display prompts
These prompts can appear during general call features:
Display prompt | Description of error or action |
|
|
Key: NNN = DNs#; SSS = second DN#; XXX = line number; YYY = second line number
Double SS symbols indicate a long distance call. (May be available with Call Display services.)
01:9___
CANCL BKSP OK
3 parties only
4 calls
NNN 02:47
XXX<LINENAME>
SHOW OK
NNN:Busy
NEXT VIEW
NNN:Idle
NEXT VIEW
Speed dial: Continue entering the number you want to program. You can change the number by pressing BKSP or the volume bar. When you are finished, press HOLD or OK.
Conference call: You are trying to add a fourth party to your conference call, or to join two conferences together.
Release one call from the conference before adding another, or keep the two conferences separate.
The conference master presses one of the keys representing the
Call duration timer: The display shows the last call you made, or the total elapsed time in minutes and seconds on a current call.
Button inquiry: The display shows the number and name of the line. Press SHOW to view the redirection status of the line.
Hunt group: The hunt group member is in a conference, and the supervisor cannot break in. The display briefly shows Conference busy, and then reverts to this prompt.
Hunt group: The hunt group member currently is not handling a call.