Nortel Networks N0060600 manual System Wide Call

38Chapter 5 System features and feature codes

Table 7 Button Programming Feature settings (Sheet 2 of 4)

Set command
(FEATURE	Feature	Description
<code>)
71	Link	Activates the Link command, which allows the user to access special
		features on a remote PBX system.
74	Call park	Allows the user to park a call.
*520	Find available SWCA key	System searches for a free SWCA key among the SWCA keys that are
		assigned to the current telephone.
*521 to *536	System Wide Call	Non-intercom calls are associated with an available SWCA key when the
	Appearance (1 to 16)	call is answered, originated, or placed on Hold.
		Features that interact with this feature: Hold, telephone keys, outgoing
		and incoming calls.
*537	Find oldest SWCA call	System searches among the SWCA keys assigned to the telephone, and
		unparks the call that has been parked the longest.
*538	Find newest SWCA call	System searches among the SWCA keys assigned to the telephone, and
		unparks the most recently parked call.
*550	Silent monitor	Allows the user to monitor hunt group calls. (Telephone must be
		assigned with SM supervisor.)
75	Group pickup	Allows the user to answer a call ringing telephone within the Pickup
		group.
76	Directed pickup	Allows the user to answer any ringing telephone within the same system.
77	Call timer	Allows the user to see the call duration timer.
78	Pause	Allows the user to insert a pause during a dialing sequence.
79	Exclusive hold	Allows the user to place a call on hold at the current telephone. All
		appearances of the call on other telephones indicate the line is busy.
800	Trunk answer	Allows the user to answer a ringing line while in a ringing service. (If
		enabled).
801	Call queuing	Allows the user to answer calls in order when several calls arrive in rapid
		succession. Calls are presented in this order: incoming calls, timed-out
		forwarded calls, then camped calls.
802	Group listening	Activates the speaker on the set to allow a group of people to hear a call.
		But the user must talk to the caller through the handset.
803	Time	Briefly displays the current time.
804	Wait for dialtone	Places a pause in a dialing string that holds the following digits until a
		dialtone is perceived on the line.
806	Static date and time	First line displays the date and time.
807	Ringing (Signal) call	Directly rings another telephone inside the system when an extension is
		entered after the feature is selected. This is the same process as
		pressing an intercom button and dialing an extension.
808	Long tones	Allows the user to send long DTMF tones.
811	Call information	Allows the user to view information about a current call.
812	Call log - view	Allows the user to view call log information.
	information
813	Call LogIt	Allows the user to add the current call to the call log manually.

N0060600