115
Chapter 17
Configuring analog telephones and devices
Refer to the following information for attributes that are specific to analog telephones and devices. Refer to “Configuring an analog telephone” on page 116.
Task: Setting up each analog device attached to your system
Determine the programming for individual telephones and devices attached to analog station modules or to digital station modules through an analog terminal adapter (ATA) module.
•“Configuring an analog telephone” on page 116
Analog telephones and devices have a limited feature set. They do not have programmable buttons, access to remote voice mail systems, or user preferences. These telephones also do not support Answer DNs.
As well, specific ATA settings are required. These settings depend on how the telephone is connected to the system (ASM, ASM8+, or ATA).
Prerequisite programming:
The following programming must be completed prior to performing this configuration:
•Numbering plan
•Lines programming
•Analog or digital module installation, configuration and wiring to the devices (ATA module, if required).
