Nortel Networks N0060600 manual Hospitality Rooms, Call Restrictions, Wake-Up Call Settings

Chapter 16 Configuring Hospitality services 111

Table 36 Hospitality main settings (Sheet 2 of 2)

Field		Values	Description
Room condition password		<up to six digits>	Set the password that allows access to the
			Room condition feature (FEATURE 876).
			Default password: None
		Nortel strongly recommends that you change the default password, and
		frequently change the desk password to prevent unauthorized entry.
	!
Call Restrictions
Vacant filter		<two-digit filter #>	Enter a code that indicates which calls are
			allowed when a room is empty (for
			example, 911).
Basic filter		<two-digit filter #>	Enter a code that indicates which calls are
			allowed for a basic room telephone. (for
			example 911, and internal calls only)
Mid filter		<two-digit code>	Enter a code that indicates which calls are
			allowed for a telephone with mid service. (for
			example 911, internal calls, and 1-800
			numbers only)
Full filter		<two-digit code>	Enter a code that indicates which calls are
			allowed for a telephone with full service. (i.e.
			no restrictions)
Wake-Up Call Settings
Attempts		<1-5>	Select the number of times the Alarm time
			feature attempts to alert the occupant before
			cancelling.
			Default: 3
Retry interval		2, 4, 6, 8 (minutes)	Select the interval between each attempt to
			send the alarm.
			Default: 4
Alarm duration (sec.)		10, 15, 20, 25, 30, 35, 40, 45,	Select the period that a telephone rings for
		50 (seconds)	each alarm attempt.
			Default: 15
Expired Wake-Up Call Settings
Notify DN		None/DN: <telephone DN>	Enter a telephone DN if you want to notify a
			specific telephone when an alarm expires.
Use tone		<check box>	Select if you want the user to hear a tone
			when the alarm expires.

Hospitality - Rooms

The Hospitality - Rooms panel allows you to assign telephones to a room. You can assign a maximum of five telephone DNs to a room.

BCM 4.0 Device Configuration Guide