
|
|
| Chapter 10 Configuring system speed dial numbers 87 |
Table 31 System Speed Dial (Sheet 2 of 2) |
| ||
|
|
|
|
Facility | Use prime line |
| Select the route you want the dialed number to remove from your |
| Use line |
| system. |
|
| Note: Any lines or pool codes that you specify must be assigned to | |
| Pool code |
| |
|
| the telephone where the code is entered. | |
| Use routing table |
| |
|
| If you choose prime line, a prime line must be assigned to the | |
|
|
| |
|
|
| telephone where the code is entered. |
|
|
| Refer to “Line Access tab” on page 44. |
|
|
|
|
Display | Digits, Name |
| Digits = the speed dial number displays |
|
|
| Name = the first 16 characters of the name defined for the speed |
|
|
| dial displays |
|
|
|
|
Name | <alphanumeric> |
| Enter a descriptive name for the owner or business code dials. |
|
|
| Note: For alpha tagging, this is the name that the system displays if |
|
|
| there is a number match with an incoming call. |
|
|
|
|
Bypass restrictions | <check box> |
| Disabled = the dialed number uses the line and set restrictions |
|
|
| Enabled = the dialed number bypasses any line and set restrictions |
|
|
|
|
Notes about the System Speed Dial list
The following provides general notes about using the System Speed Dial panel.
Choose the size of the speed dial list
•The default list consists of 70 speed dial codes from 01 to 70.
•If you set Number of speed dials to 255, the codes are 001 to 255.
If you want to use alpha tagging (see “Using alpha tagging for name display (incoming)” in the BCM 4.0 Networking Configuration Guide (N0060606)), you can increase the number of codes to allow for more matching possibilities for incoming calls.
Note: If the number of speed dial numbers is increased from 70 to 255, the system speed dial codes are three digits. For example speed dial numbers
Programming System speed dials
System speed dials are programmed under Configuration > Telephony > Global Settings > System Speed Dial, where you specify the internal or external dialed number, a name, and whether you want the system to ignore dialing restrictions.
System Speed Dials:
•Provide a list of codes and numbers to your users.